Top 10 Rapsberry Pi 4 battery – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. MakerFocus

#ad

RPI Pack Standard 10000mAh Raspberry Pi Battery USB Battery Pack Raspberry Pi Latest Version V3 Expansion Board Power Supply Type-C for Raspberry 4B 3B+ 3B 2B+, Raspberry Pi 4 Battery Pack UPS

#ad
MakerFocus #ad - 2power led: when the switch is turned “on”, the lED is lighting, and when it is “OFF”, LED is off. The maximum external power supply capacity is: 5. 1v. Note: if you use ups to power raspberry pi3b/3b+ while charging, please make sure that the input power is not less than 2.

5a. 4+2led are designed to show the status of battery power, charge or discharge: 1 4 battery power leds: used to show the current battery voltage and power. 2 as an indoor ups power supply mode: the ups power supply interface is connected to an external 5V power supply, and the maximum output current can reach 5V 3A. 2. 5a. Recommended use: 3V 2. 5a power supply The document link is obtained in the product description. 3 charge charging indicator led: when the UPS is externally charged via the MicroUSB interface, the Charge LED starts to work.

Protect function: the external output port has a self-recovery fuse to prevent the rpi from burning due to an external short circuit. Two output modes: except for the regular output via the USB port. Used to check whether the power is supplied externally. 2 pmu over-discharge protection: When the lithium batter voltage is lower than 2.
BrandMakerFocus #ad
ManufacturerMakerFocus #ad
Height1.18 Inches
Length3.66 Inches
Weight0.15 Pounds
Width2.44 Inches
Part NumberS103318L6T
ModelS103318L6T

2. MakerFocus

#ad

3B 2B+, MakerFocus Raspberry Pi 4 Battery Pack UPS, USB Battery Pack Raspberry Pi, Latest Version V3 Expansion Board Power Supply Type-C for Raspberry 4B 3B+, RPI Pack StandardRaspberry Pi Battery

#ad
MakerFocus #ad - Support charge while discharge: it will not affect the output of ups power supply when external power outage. 2power led: when the switch is turned “ON”, the LED is lighting, the Charge LED starts to work.

Used to check whether the power is supplied externally. At strong currents, cable damaged will cause lighting bolts on the rpi, which is soldered to the Raspberry Pi GPIO 5V interface for direct power supply, the drop in voltage on the USB cable is a problem that can not be ignored. So we provide a 2. 54mm head as gift, to minimize the damaged cable and pressure drop. Battery size: 70mm x 41mm x 9. 5mm.

Recommended Use: 3V 2. 5a power supply. With protect function: the external output port has a self-recovery fuse to prevent the raspberry pi from burning due to an external short circuit. The 5v output will be automatically restored. 2. 5a. Two power modes: outdoor portable model and indoor ups power supply mode: 1 as an outdoor portable power supply, the motherboard is powered by a lithium battery.
BrandMakerFocus #ad
ManufacturerMakerFocus #ad
Height0.79 Inches
Length3.35 Inches
Weight0.17 Pounds
Width2.17 Inches
Part Number24A125114LNA4A378
Model4328613101

3. MakerHawk

#ad

MakerHawk Raspberry Pi UPS Power Supply Uninterruptible UPS HAT 18 650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4 Model B / 3B + / 3B Not include battery

#ad
MakerHawk #ad - It provides uninterruptible power for the Raspberry Pi to make your Raspberry Pi still work while moving, load high current line compensation function. The illuminated led light can quickly show the remain power and support the discharging while charging.

Do not add any Components by yourself. Multiple protection support output overcurrent, overdischarge, short circuit protection; input overvoltage, overvoltage, overcharge, overcurrent discharge protection and machine overheat protection. Please do not reverse the battery. There are two usb a port power output, support side-loading, and its design is so smart that you can get rid of troubled of a mass wire. Intelligent design ups for raspberry pi 4b / 3b+ / 3b.

At the same time, the Raspberry Pi will not be turned off. 100% satisfaction warranty We always bear in mind that your satisfaction is our priority. Use and note this product belongs to the power supply device. If the battery polarity is reversed, it will directly burn the power management chip of the device. Package 1* raspberry pi ups; 4* m2. 5* copper stick; 4* m2. 5 screws; 4* m2.
BrandMakerHawk #ad
ManufacturerMakerHawk #ad
Height0.39 Inches
Length3.82 Inches
Weight0.18 Pounds
Width2.24 Inches
Part Number0
Model13JK51MZ8R923N6RQAYV

4. Geekworm

#ad

Auto On & Safe Shutdown Function for Raspberry Pi 4B/3B+/3B, X728 V2.0 Max 5.1V 6A 18650 UPS & Power Management Board with AC Power Loss Detection, Geekworm Raspberry Pi UPS

#ad
Geekworm #ad - Do not use 18650 battery with built-in protection circuit. Important note1. Do not apply power to your raspberry Pi via the Micro USB socket or Type-C socket. 2. Power supply via type-c socket : 5vdc ±5%, via dc power jack : 5vdc ±5%, ≥3a, ≥4a; ups output : 5.

1v ±5% max 6a; ups charging current: 2. 3~3. 2a; terminal Battery Voltage : 4. 24v; recharge Threshold : 4. 1v. X728 provides 5. 1v 6000ma power backup for even the most demanding Raspberry Pi set ups, full poweroff from software, auto power-on, safe shutdown, intelligent and safe power management, and a real- time clock. The x728 can also be used with the X825/X828/X829 2.

5" hdd/ssd shield and x857/x862/x872 MSATA/M. 2 ssd shield for safe data backup. X728 reserves the 40-pin header to stack with other raspberry pi accessory boards for enhanced applications. User manualrefer to geekworm wiki search x728; no design case for x728 now, you can use this HAT size case ASIN:B074T7D1V5 or N300 CaseB07X5Y81C6 for X728.
BrandGeekworm #ad
ManufacturerGeekworm #ad
Height1.38 Inches
Length3.35 Inches
Weight0.13 Pounds
Width2.52 Inches
Part NumberTB-2019-71

5. Pi Supply

#ad

PiJuice HAT – A Portable Power Platform For Every Raspberry Pi

#ad
Pi Supply #ad - Onboard 1820 mah “off the shelf” lipo / liion battery for ~4 to 6 hours in constant use! with support for larger Lipo Battery of 5000 or 10, 000 mAH+ to last up to 24 hrs +. A full uninterrupted / Uninterruptable Power Supply solution. Integrated Real Time Clock. Onboard intelligent on/off switch. Designed for the raspberry pi a+, b+, 2b and 3B but also compatible with Raspberry Pi Zero v1. 3 and Wireless.
BrandPi Supply #ad
ManufacturerPi Supply #ad
Height1.38 Inches
Length4.33 Inches
Weight0.22 Pounds
Width4.92 Inches
Part NumberPIS-0212
ModelPIS-0212

6. NEEGO

#ad

NeeGo Raspberry Pi 4 Screen Case for Raspberry Pi Monitor Touchscreen Display 7-inch

#ad
NEEGO #ad - Get it complete with the Philips Screwdriver 3"- Included. All ports are accessible- All ports of the Raspberry Pi are accessible, including the HDMI. This case is designed to house your raspberry Pi 4 board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display.
BrandNEEGO #ad
ManufacturerNeeGo #ad
Part NumberASM-1900147-21

7. iUniker

#ad

Raspberry Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B, iUniker Raspberry Pi 4 Fan ABS Case with Cooling Fan, Raspberry Pi 4 Case

#ad
iUniker #ad - Unique removable top cover design, you can get in touch with the GPIO or Camera Connector Very Simple. Notice: updated version can compatible with Pi 4 Model B. With 40mm quiet cooling Fan, it can drop the temps for your Pi. Include raspberry Pi 4 Heatsink, Better Cooling Experience. Awesome looking, it can make your Pi looks Cooler than others.
BrandiUniker #ad
ManufactureriUniker #ad
Height1.57 Inches
Length4.72 Inches
Width2.36 Inches
Part NumberIU-RP-045-01-CB
ModelIU-RP-045-4B

8. CanaKit

#ad

CanaKit Raspberry Pi 4 4GB Basic Kit with PiSwitch 4GB RAM

#ad
CanaKit #ad - Includes raspberry pi 4 4gb model b with 1. 5ghz 64-bit quad-core CPU 4GB RAM. Canakit usb-c piswitch On/Off Power Switch. Canakit 3. 5a usb-c power supply with noise Filter UL Listed specially designed for the Raspberry Pi 4 5-foot cable. Set of 3 aluminum heat Sinks for the Raspberry Pi 4.
BrandCanaKit #ad
ManufacturerCanaKit #ad
Part Number99280

9. Pastall

#ad

Pastall Raspberry Pi 4 Power Supply 5V 3A USB Type C Power Supply Adapter with ON/Off Switch

#ad
Pastall #ad - Length:100cm. Input: ac 110-240v 03a 50/60Hz. Output: dc 5V 3A. Over voltage protection, short circuit protection, under voltage protection, over temperature protection, over current protection. Type c power supply charger with ON/Off Switch for Raspberry Pi 4B.
BrandPastall #ad
ManufacturerPastall #ad
Part NumberDH112257

10. Argon Forty

#ad

And LCD Display | All Aluminum Heatsink Enclosure, Camera, Argon NEO Raspberry Pi 4 Case | Designed for GPIO and PoE Access, Cooling Fan

#ad
Argon Forty #ad - Supports up to the Raspberry Pi 4 8GB model. Keeps access to gpio module, Cooling Fan, Camera, and LCD Display Port. Small formed cooling case that especially keeps the Raspberry Pi 4 safe. Maker-friendly design. The perfect raspberry Pi 4 Case that keeps your Pi cool even at maximum performance. Fits any official Raspberry Pi HAT.
BrandArgon Forty #ad
ManufacturerArgon Forty #ad
Part NumberAR_NEO_Case