As an Amazon Associate I earn from qualifying purchases.
1. AEOTEC #ad
Aeotec Multisensor 6 with Battery, Light, Vibration Sensor, Humidity, Z-Wave Plus 6-in-1 Motion, Temperature, UV #adAEOTEC #ad
- Works with certified z-wave gateways and tested with Fibaro, SmartThings, Indigo 7, HomeSeer, openHAB, and Vera.1 x cr123a included in the box. Z-wave plus certified. Super-small at 1. 65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with Recessor accessory.
6-in-1 zwave multisensor: smart motion sensors, lux, Zwave light sensor, temperature sensor, UV, z wave humidity, vibration sensor. Certification number: ZC10-15070011. Up to 2 year battery life with 2 batteries or power via USB.
2. Aeon Labs #ad
Light, Aeotec Multisensor 6, temperature, vibration sensor, Z-Wave Plus 6-in1 motion, humidity, UV #adAeon Labs #ad
- 2 year battery life. Certification number: ZC10-15070011. 6-in-1 z-wave plus multisensor: motion, UV, light lux, humidity, temperature, vibration sensor.
Super-small at 1. 8 inches. Z-wave plus certified. Works with certified z-wave gateways and tested with Fibaro, SmartThings, openHAB, Indigo 7, Vera. Can be installed in corner, in-wall, on shelf or in downlight.
|Brand||Aeon Labs #ad|
|Manufacturer||Aeon Labs LLC #ad|
|Warranty||1 year warranty against manufacturer defects|
3. MakerFocus #ad
MakerFocus 2pcs ESP8266 ESP-01 Serial Wireless WiFi Transceiver Receiver Module 1MB SPI Flash with DHT11 Temperature and Humidity Sensor Module for Arduino #adMakerFocus #ad
- Download the program to ESP-01 Sthis connection does not include this wireless module. This module to esp8266 as the master, dht11 for the temperature and humidity sensor. Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.
Regarding for the esp-01s: input power: 3. 3v, i/o voltage tolerance: 3. 6v max, flash memory size: 1mb 8mbit, wifi security modes: WPA, WPA2; Regarding for the DST11 sensor:support 3.7 v-12v dc supply 3. 7 v lithium battery; measurement range: 20-90% RH 0 to 50℃.
The operating example included two way: 1. Power supply: 3. 7v-12v dc power supply connect to VCC GND2. 54mm pin header; 2. Esp8266 collection environment temperature and cooling upload to the server.
Esp8266 esp-01 series is a highly integrated chip which offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor; it also has powerful on-board processing and storage capabilities; Support 3 modes: AP, STA, AP STA. The digital modules and acquisition of temperature and humidity sensor technology ensures that products with high reliability and excellent long term stability.
4. DIYmall #ad
DIYmall BME280 Humidity Temperature Sensor Barometric Pressure Sensor Module with IIC/I2C for Arduino GY-BME280-5V Pack of 1pc #adDIYmall #ad
- Document link: https://drive. Google. Com/file/d/0b8dsgdar8_31wwp4cHh1UkJuSnc/view?usp=sharing. What you will get is: 1 X Bme280 Sensor module. With an i2c connection you have access to enough weather data to make some pretty good predictions for your local area.
The bme280 is a great new chip which was originally designed for the next generation of smartphones.
5. Bicool #ad
Waveshare BME280 Environmental Sensor Temperature Humidity Barometric Pressure Atmospheric Pressure Support I2C and SPI Interface Compatible with 3.3V/5V Voltage Levels #adBicool #ad
- Barometric pressure sensing: 300~1100 hPa resolution 018pa, accuracy ±1hPa. A tiny sensor breakout with bme280 onboard, low power consumption, and iot projects, the bme280 environmental sensor is suited for applications such as environment monitoring, and barometric pressure.
Humidity sensing: 0~100%rh resolution 0008%rh, response time 1s, delay ≤2%RH. Onboard voltage level translator, compatible with 3.
3v/5v operating voltage. Mounting hole size: 2. 0mm. Dimension: 27mm x 20mm. Temperature sensing: -40~85°c resolution 001°c, accuracy ±3%rh, accuracy ±1°c. Supports i2c default, configurable slave address.
Due to its ultra small form factor, and so on. Comes with development resources and manual examples for Raspberry Pi/Arduino/STM32. It supports both i2c and spi interfaces, altimeter, humidity, weather forecast, sensing environmental temperature, high precision with stability, also is compatible with 3.3v/5v voltage levels. Power consumption:
6. AEOTEC #ad
Light, Humidity, Vibration Sensor, Aeotec Multisensor 6 & Ceiling Recessor, UV, Battery included, Z-Wave Plus 6-in-1 Motion, Temperature #adAEOTEC #ad
- Z-wave plus certified. Works with certified z-wave gateways and tested with Fibaro, HomeSeer, Indigo 7, SmartThings, openHAB, and Vera. Can be installed in corner, in-wall, on shelf or recessed in ceiling with provided Recessor accessory.
Super-small at 1. 65 inches. 1 x cr123a included in the box. Certification number: ZC10-15070011. Up to 2 year battery life with 2 batteries or power via USB. 6-in-1 zwave multisensor: smart motion sensors, lux, temperature sensor, z wave humidity, Zwave light sensor, UV, vibration sensor.
7. ZOOZ #ad
ZOOZ Z-Wave Plus 4-in-1 Sensor ZSE40 VER. 2.0 motion / light / temperature / humidity #adZOOZ #ad
- Compatible z-wave hub required, humidity, temperature, sold separately. Security first: this sensor is equipped with bank-grade AES signal encryption. 4 smart sensors in 1: this compact device detects and reports motion, and light level to your smart home app.
It will work great with open systems like almond securify, Home Assistant, ADT Pulse, VeraEdge, VeraLite running under UI7, Qolsys, HomeSeer, and VeraPlus. It's z-wave plus certified to ensure it complies with the highest industry standards.
New improved version: the included cr123A battery makes the sensor lasts much longer than the previous version. Updated motion detection allows you to get even quicker activity reports.
Will it work with my hub? this sensor is not supported by wink, hubitat, vivint, smartthings hub with custom device handler contact seller for instructions, or other Z-Wave alarm panels. Customize it: choose from 7 levels of motion sensitivity, adjust the motion re-trigger interval, and pick from 4 different LED indicator modes your hub needs to support advanced parameter input.
8. AITRIP #ad
2pcs DHT11 Temperature Humidity Sensor Module Digital Temperature Humidity Sensor 3.3V-5V with Wires for Arduino Raspberry Pi 2 3 2pcs DHT11 #adAITRIP #ad
- Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected. Humidity measure range 20%-95%, humidity measurement error: +-5%; Temperature Measure Range 0-50°C, temperature measurement error: +-2 degrees.
The single-wire wiring scheme makes it easy to be integrated to other applications. And the simple communication protocol greatly reduces the programming effort required.
Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor. It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability. Working voltage: dc 3. 3v-5v. Output form: digital output.
9. Google #ad
Google, 3 Pack, White, Nest Temperature Sensor, T5001SF #adGoogle #ad
- Google nest compatibility: Communicates temperature to compatible Google Nest thermostats up to 50 feet away. Temperature sensor: Put temperature sensors in different rooms and choose which room to prioritize when. Then forget it's even there.
Low energy bluetooth connection: up to 6 Google Nest Temperature Sensors supported per connected thermostat and up to 18 Nest Temperature Sensors supported per home. Temperature controller: Helps make sure a certain room is the exact temperature you want it to be. Wireless: place it on a wall or shelf.
|Model||Nest Sensor: 3 pack|